MITSUBISHI
Home >> Download >> MITSUBISHI >> Manual Download >> MITSUBISHI A2ACPUP21 AD57 control Instructions Manual A2ACPUP21 Programming Manual

MITSUBISHI A2ACPUP21 AD57 control Instructions Manual A2ACPUP21 Programming Manual

Brand: MITSUBISHI
Product model: A2ACPUP21
Name: PLC
Sort: Programming Manual (AD57 control Instructions)
File language: English
File size: 8.24MB
The A1SP60 pulse capture module is a 16 point DC24V input module,
Can be used as a general input module,
Can also be used as a pulse capture module,
Pulse capture function makes the input signal width in the sequence can be as short as 0.5ms,
Once there is a pulse signal input, the state is memory,
A1SP60 to ensure that the control process at least once again to control the state of the memory of the operation,
Input can be set to 4 blocks,
Each block can be set to a general function or pulse capture function A2ACPUP21 AD57 control Instructions Manual A2ACPUP21 Programming Manual A2ACPUP21 Cable length: 0.33 meters.
Extending cable to connect CPU main substrate and extended substrate,
According to the model can provide different cable length,
If you need to connect the AnN type expansion substrate is required,
Selection of A1SC05NB (A1SC07NB) cable A2ACPUP21 AD57 control Instructions Manual A2ACPUP21 Programming Manual. Input type: DC input, positive common end.
Input points: 16 points.
Enter the response time: 0.2ms the following.
Rated input voltage / current: DC24V/5mA.
Output form: transistor output, leakage type.
Output points: 16 points.
OFF leakage current: 0.1mA.
Output protection function.
Rated load voltage / current: DC24V/0 A2ACPUP21 AD57 control Instructions Manual A2ACPUP21 Programming Manual. 1A.
External connection: 1 line /1 line type.
40 pin connector type (FCN connector type).
Through the 40 pin connector type (FCN connector type) can be connected to a variety of devices.
Can be installed along the 6 direction.
Hardware simulation method is to use a number of hardware equipment to simulate the generation of the signal,
The signals are connected to the input end of the PLC system in a hard wired way, and the timeliness is strong.
Software simulation method is in the MITSUBISHI PLC in the preparation of a set of simulation program,
The simulation provides the field signal, which is simple and easy to operate, but it is not easy to guarantee the timeliness.
Simulation of the process of debugging, debugging method can be used to segment, and the monitoring function of programmer. I/O slots: 5 slots.
Can you install the power module.
Outline dimension: 260*130.
There are two types of extended floor,
A power module can be inserted, and the other one is not.
The choice of any type of substrate depends on the total DC5V ccurrent consumption and the power supply on the CPU main substrate A2ACPUP21 AD57 control Instructions Manual A2ACPUP21 Programming Manual.
If the total demand is less than the power output, no additional power supply,
Then you can choose a more ecconomical expansion board A2ACPUP21 AD57 control Instructions Manual A2ACPUP21 Programming Manual.
Both ends of the main base plate of the CPU have an expansion interface, and can be used for extending the cable connection.
Related products
MITSUBISHI
CPU unit
A2ACPUP21-S1
MITSUBISHI CPU unit A2ACPUP21-S1
Input and output points: 1024 points. Input /
MITSUBISHI
CPU unit
A2ACPUR21-S1
MITSUBISHI CPU unit A2ACPUR21-S1
Input and output points: 1024 points. Input /
MITSUBISHI
CPU unit
A2ACPU
MITSUBISHI CPU unit A2ACPU
Input and output points: 512 points. Input /
MITSUBISHI
CPU unit
A2ACPUP21
MITSUBISHI CPU unit A2ACPUP21
Input and output points: 512 points. Input /