Cable 0.6m for the expansion of the floor, the expansion of a floor for every 1 units.RS-232 2 channel.
Transfer speed: 0.3-19.2kbps.
Input status and input information input from the input interface,
CPU will be stored in the working data memory or in the input image register.
And then combine the data and the program with CPU A2ACPUR21-S1 AD57 control Instructions Manual A2ACPUR21-S1 Programming Manual A2ACPUR21-S1
The result is stored in the output image register or the working data memory,
And then output to the output interface, control the external drive.
Semiconductor circuit with memory function.
System program memory and user memory.
System program memory for storing system program,
Including management procedures, monitoring procedures, as well as the user program to do the compiler to compile the process of interpretation A2ACPUR21-S1 AD57 control Instructions Manual A2ACPUR21-S1 Programming Manual.
Read only memory. Manufacturers use, content can not be changed, power does not disappear. Cable length: 30 meters.
For QnA/A/FX (FX1, FX2, FX2C) CPU and GOT connection between.
For connection between FA-CNV_CBL and GOT.
For connection between FX-2PIF and GOT.
For connection between FX-422AW0 and GOT.
For serial communication module AJ71QC24 (N) -R4 and GOT connection between A2ACPUR21-S1 AD57 control Instructions Manual A2ACPUR21-S1 Programming Manual.
For connection between AJ65BT-G4-S3 and GOT. TFT color LCD touch screen to replace the backlight.
Applicable model: A985GOT-V. Output type: transistor output, drain type.
Output points: 16 points.
OFF leakage current: 0.1mA.
Output protection function.
Rated load voltage / current: DC24V/DC24V/0.1A.
External connection: 2 wire.
Sensor connector type (E-CON type).
Using industry standard E-CON type.
Simple wiring through sensor connector.
When installing the module can choose to use the DIN guide rail or screw mounting.
3 wire sensor input. Series Name: A953GOT.
Size: 6 inches.
Resolution: 320 * 240.
Display device: STN color display.
Display color: 8 color.
Power supply: DC24V.
The built-in RS-232 communication interface.
Memory card: 3M.
Design any machine interface, generally have to consider the system response time, user assistance mechanism, error information processing and command mode four aspects.
System response time is too long to be the most users in the interactive system,
In addition to the absolute length of the response time, the user is also very concerned about the difference in response to different commands in response time,
If too wide users will be difficult to accept; user assistance mechanism should be integrated,
Avoid overlay systems that cause users to turn to a guide and have to browse a large number of irrelevant information;
At the same timme, it should be as far as possible to provide some suggestions on the recovery of errors A2ACPUR21-S1 AD57 control Instructions Manual A2ACPUR21-S1 Programming Manual.
In addition, when the error message is displayed, the effect is better if it iss supplemented by the auditory (Bell) and visual (special color) stimulus;
Command mode is the best menu and keyboard commands, for the user to choose A2ACPUR21-S1 AD57 control Instructions Manual A2ACPUR21-S1 Programming Manual.