MITSUBISHI
Home >> Price >> MITSUBISHI >> MR-J2-20A Market price | MR-J2-20A Introduction
Brand sort

MITSUBISHI MR-J2-20A Market price | MR-J2-20A Introduction

Country: JAPAN
Name: Universal interface driver
Model: MR-J2-20A
Market price: U.S.$ 1555.93
(The following are the market open price not sales price!)
MITSUBISHI MR-J2-20A
Motor series: low inertia, low power.
Rated output power: 0.75kw.
Rated speed: 3000r/min.
Whether with brake: No.
Shaft end: Standard (straight).
Protection level: IP55 does not include the shaft part and the connector.
Features: low inertia is particularly suitable for high speed motor (6000 or 12000 RPM / min) of general industrial machinery.
Application example 1: drive belt drive, robot.
Application example 2: assembly machine, sewing machine, X-Y working table MR-J2-20A
Application example 3: food manufacturing machinery, semiconductor manufacturing equipment, knitting machine and embroidery machine.
High resolution encoder 131072p/rev (17 bit).
The encoder with high resolution ensures excellent performance and stability at low speed.
All motor dimensions are the same as before and all are compatible with the wiring. MITSUBISHI inverter series: FR-F840.
Voltage level: three phase 400V.
Power: 0.75kw.
SLD converter rated current: 2.3A.
Structure and function: Standard model.
Type: CA.
Substrate coating: have.
2 times the power consumption of the wind turbine and pump and the speed of the 3 power consumption is proportional to the speed of the rotating speed.
Through the speed control of the frequency converter to adjust the air flow, can reduce the power consumption.
Give full play to the performance of the motor.
The excitation current is always adjusted to the best state, which can improve the efficiency of the motor.
Load torque is smaller, can further improve energy efficiency.
For example, when a general motor is used, the optimal excitation control mode in the 4% motor load torque is about 30% more than that of the V/F control. Cable length: 30.6m.
Long distance connection between CPU (A Series) and GOT for QnAS/AnSCPU/ motion controller.
Long distance connection between A7GT-CNB and GOT.
Applicable models: GT16, GT15, GT11. Protective film for 5.7 inch screen.
Transparent (frame: white), 5.
Applicable model: GT14. Motor series: low inertia, medium and small capacity.
Using a serial absolute / incremental encoder.
Rated output power: 0.1kw.
Rated speed: 3000rpm.
With a brake band.
Shaft end: straight shaft.
Comparison of single phase induction motor and servo motor.
The working principle of the AC servo motor is similar to that of the single phase induction motor,
But the rotor resistance of the former is much larger than that of the latter,
So the servo motor is compared with the single machine asynchronous motor,
There are three notable features:
1, large starting torque.
2, a wide range of operation.
3, no rotation phenomenon.
AC servo motor running smoothly, low noise.
But the control characteristic is non-linear, and because the rotor resistance is big, the loss is big, the efficiency is low,
Therefore, compared with the same capacity DC servo motor, the volume is large and the weight is heavy,
So it is only suitable for 0.5-100W small power control system.
MR-J2-20A Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=MR-J2-20A&select=5


...more relevant model market price >>>>
Related products
MITSUBISHI
Servo driver
MR-J4-11KB4-RJ
MITSUBISHI Servo driver MR-J4-11KB4-RJ
1 axis servo amplifier. MITSUBISHI gener
MITSUBISHI
SSCNET interface servo amplifier
MR-J2S-20B1
MITSUBISHI SSCNET interface servo amplifier MR-J2S-20B1
"MITSUBISHI general purpose AC servo amp
MITSUBISHI
Servo driver
MR-J4-22KB-RJ010
MITSUBISHI Servo driver MR-J4-22KB-RJ010
1 axis servo amplifier. MITSUBISHI gener
MITSUBISHI
SSCNET interface servo amplifier
MR-J2S-700B
MITSUBISHI SSCNET interface servo amplifier MR-J2S-700B
"MITSUBISHI general purpose AC servo amp