MITSUBISHI
Home >> Products >> MITSUBISHI >> Q series PLC >> Universal CPU >> Q26UDHCPU | MITSUBISHI General purpose CPU Q26UDHCPU

Q26UDHCPU | MITSUBISHI General purpose CPU Q26UDHCPU

MITSUBISHI Q26UDHCPU Manual And Instructions
Q26UDHCPU datasheetPDF datasheet
Q26UDHCPU datasheetPDF datasheet
Q26UDHCPU Special InstructionsStrctured Programming Manual
Q26UDHCPU Application FunctionsStrctured Programming Manual
Q26UDHCPU Common InstructionsStrctured Programming Manual
Q26UDHCPU FundamentalsStrctured Programming Manual
Q26UDHCPU Multiple CPU SystemUser's Manual
Q26UDHCPU Function Explanation, Program FundamentalsUser's Manual
Q26UDHCPU Hardware Design, Maintenance and InspectionUser's Manual
Q26UDHCPU Structured TextProgramming Manual
Q26UDHCPU MELSAP-LProgramming Manual
Q26UDHCPU SFCProgramming Manual
Q26UDHCPU PID Control InstructionsProgramming Manual
Q26UDHCPU Common Instructions 1/2Programming Manual
Q26UDHCPU Structured Text(ST)Programming Guide Book

MITSUBISHI Q26UDHCPU Product information and technical parameters:
Brand: MITSUBISHI
Name: General purpose CPU
Model: Q26UDHCPU
Input / output points: 4096 points.
Number of input and output elements: 8192.
Program capacity: 260 K step.
Processing speed: 0.0095 s.
Program memory capacity: 1040 KB.
Support USB and RS232.
Support installed memory card.
Providing high speed communication between multiple CPU.
Shorten the fixed scan interrupt time, high precision device.
The minimum interval of the fixed period interrupt program is reduced to 100 s.
The high speed signal can be accurately obtained, which makes the contribution to the higher precision of the device.
High speed and high precision machine control by multi CPU.
By parallel processing of the linear and multi CPU high-speed communication (cycle 0.88ms) of the parallel control program, the high speed control.
Multi CPU high speed communication cycle and motion control synchronization, so it can achieve the maximization of computing efficiency.
In addition, the latest movement control CPU in performance is 2 times the previous model,
To ensure high speed and high accuracy of the machine control.

Manual pulse generator /INC synchronous encoder input:
Use number: 3 sets of /1 modules.
Automatically transfer the record file to the FTP server
Simply by recording the configuration tool to carry out a simple setup,
A data record file stored on the SD memory card can be sent to the FTP server.
Because the record server can handle multiple files, it can reduce the task of management and maintenance MITSUBISHI Q26UDHCPU Q26UDHCPU
When a failure occurs, it can quickly respond to.
Simply extract the data associated with the problem, do not have to spend a lot of time to filter a large number of diagnostic data,
So it can quickly determine the cause of the failure, and make the solution.Input points: 64 points.
Input voltage and current: 4mA DC24V MITSUBISHI Q26UDHCPU.
Response time: 0.1/0.2/0.4/0.6/1ms.
32 point /1 a public side.
Common cathode.
40 pin connector.
Continue to go beyond, to climb the peak of Q series.
Strengthen security function.
Can be set up to 32 characters of the file password.
In addition to the English letters, numbers, but also the use of special characters,
To further enhance the security of the password.
In addition, only pre registered devices are allowed to access CPU,
To intercept unauthorized access to unauthorized users MITSUBISHI Q26UDHCPU.
Therefore, it is important to prevent the outflow of important program assets and protect intellectual property rights.
Easy connection programming tool via ethernet.
Programming tools (Works2 GX, Developer GX) and CPU direct connection (1 to 1),
No need to carry out the IP address settings. And there is no need to select the cable, the straight line and the cross line can be used.
Therefore, this connection method and the use of USB, can easily communicate with the CPU,
Even the operators are not familiar with the network settings can easily establish a connection.
A variety of modules with excellent performance,
Meet the needs of various control from analog to location.
Q series module products include a varriety of types of I/O, analog and positioning function module Q26UDHCPU.
Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,
As well as the requirements of high-precision control of thhe positioning of the industry, the control needs of various fields Q26UDHCPU.
Can also be used in combination with the CPU module to achieve appropriate control.


...More relevant models >>>>